language KR
사업 영역(네트워크)

중계기/커버리지 장비에 적용되는 RF 관련 칩

Network

  • Key Features
    Product Key Features
    • 0.05 - 2.0 GHz Operational Bandwidth
    • Ultra low noise figure, 0.45 dB NF @ 0.9 GHz
    • High gain, 19.8 dB Gain @ 0.9 GHz
    • High linearity, +36 dBm Output IP3
    • High input power ruggedness, 22 dBm CW
    • Unconditionally stable
    • Integrated on-chip matching, 50 ohm in/out
    • Integrated active bias
    • Integrated shutdown control pin
    • +3V to + 5V supply; does not require -Vgg
    • pin compatible with high-band TQP3M9037
    • Small 2 x 2 mm package
  • Key Features
    Product Key Features
    • 2.01 - 2.17 GHz frequency range
    • Fully integrated, 2-stage power amplifier
    • -48 dBc ACLR at +42.5 dBm
    • 17% PAE at +24.5 dBm
    • 30.5 dB gain
    • 225 mA quescient current
    • Internally matched to 50 ohms
    • On-chip bias control and temperature compensation circuitry
    • Good linear performance w/o the need for linearization
  • Key Features
    Product Key Features
    • 0.6 - 6.0 GHz Operational bandwidth
    • Ultra-Low Noise Figure, 0.9 dB at 5.5 GHz
    • Bias Adjustable for Linearity Optimaizaton
    • 35 dBm OIP3 at 65 mA IDD
    • Integrated shut-down control pin
    • Shut-down mode pin with 1.8 V TTL logic compatible
    • Unconditionally stable
    • Maintains OFF state isolation with high Pin drive
    • +3 to +5 V supply; does not require -Vgg
  • Key Features
    Product Key Features
    • 50 to 4000 MHz
    • Flat gain (14.7 +/- 0.3 dB) from 0.5 to 3.5 GHz
    • +40 dBm Output IP3
    • 2 dB noise figure @ 1.9 GHz
    • No RF component needed; 50 Ohm gain block
    • Unconditionally stable
    • +5 V single supply, 85 mA current
    • SOT-89 package
  • Key Features
    Product Key Features
    • 6-Bit, 31.5 dB, 0.5 dB Step
    • Patented Circuit Architecture
    • Overshoot-free Transient Switching Performance
    • Frequency Range 5 MHz to 6000 MHz
    • High Linearity, IIP3 > +55 dBm
    • Serial Control Interface
    • Fast Switching Speed, ＜120 nsec Typical
    • Single Supply 3 V to 5 V Operation
    • RF Pins Have No DC Vottage, Can be DC Grounded Externally
    • Power-up attenuation state programmable
  • Key Features
    Product Key Features
    • 50 to 4000 MHz
    • Flat gain (14.7 +/- 0.3 dB) from 0.5 to 3.5 GHz
    • +40 dBm Output IP3
    • 2 dB noise figure @ 1.9 GHz
    • No RF component needed; 50 Ohm gain block
    • Unconditionally stable
    • +5 V single supply, 85 mA current
    • SOT-89 package
  • Key Features
    Product Key Features
    • 1.805 - 1.88 GHz frequency range
    • Fully integrated, 2-stage power amplifier
    • -48 dBcACLR at +24.5 dBm
    • 16% PAE at +24.5 dBm
    • 31 dB gain
    • 240 mA quescient current
    • Internally matched to 50 ohms
    • On-chip bias control and temerature compensation circuitry
    • Good linear performance w/o the need for linearization
02-2043-0982